|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DC/DC Converters TEN 40 Series, 40 Watt Features High Power Density: 40W in a 51x51x10mm (2"x2"x0.4") Package compliant RoHS Wide 2:1 Input Voltage Range Models with Single-, Dual- and Triple Output Models with 2 independently regulated 3.3 and 5.0 VDC Outputs Extended Operating Temperature Range: -40C to +85C Over Temperature Protection Under Voltage Lockout Remote On/Off Shielded metal Case with insulated Baseplate Optional Heatsink Lead free Design - RoHS compliant 3 Years Product Warranty Models Order code TEN 40-1210 TEN 40-1211 TEN 40-1212 TEN 40-1220 TEN 40-1222 TEN 40-1223 TEN 40-1233 TEN 40-1234 TEN 40-1231 TEN 40-1232 TEN 40-2410 TEN 40-2411 TEN 40-2412 TEN 40-2420 TEN 40-2422 TEN 40-2423 TEN 40-2433 TEN 40-2434 TEN 40-2431 TEN 40-2432 TEN 40-4810 TEN 40-4811 TEN 40-4812 TEN 40-4820 TEN 40-4822 TEN 40-4823 TEN 40-4833 TEN 40-4834 TEN 40-4831 TEN 40-4832 Input voltage range The TEN 40 series is a family of high performance 40W dc-dc converter modules featuring 30 standard models with wide 2:1 input voltage ranges in a compact low profile case with industry-standard footprint. A very high efficiency allows an operating temperature range of -40C to 85C. Built-in filters for both input and output minimizes the need for external filtering. Further standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Output 1 3.3 VDC / 8.0 A 5 VDC / 8.0 A 12 VDC / 3.3 A *3.3 VDC / 8.0 A +12 VDC / 1.8 A +15 VDC / 1.4 A 3.3 VDC / 6.0 A 3.3 VDC / 6.0 A 5 VDC / 6.0 A 5 VDC / 6.0 A 3.3 VDC / 8.0 A 5 VDC / 8.0 A 12 VDC / 3.3 A *3.3 VDC / 8.0 A +12 VDC / 1.8 A +15 VDC / 1.4 A 3.3 VDC / 6.0 A 3.3 VDC / 6.0 A 5 VDC / 6.0 A 5 VDC / 6.0 A 3.3 VDC / 8.0 A 5 VDC / 8.0 A 12 VDC / 3.3 A *3.3 VDC / 8.0 A +12 VDC / 1.8 A +15 VDC / 1.4 A 3.3 VDC / 6.0 A 3.3 VDC / 6.0 A 5 VDC / 6.0 A 5 VDC / 6.0 A Output 2 Output 3 Efficiency typ.. 86 % 86 % 86 % 85 % 85 % 85 % 84 % 84 % 86 % 86 % 87 % 89 % 88 % 86 % 87 % 87 % 85 % 85 % 87 % 87 % 88 % 90 % 89 % 88 % 87 % 87 % 86 % 86 % 88 % 88 % Page 1 of 9 9 - 18 VDC *5 VDC / 8.0 A -12 VDC / 1.8 A -15 VDC / 1.4 A +12 VDC / 0.4 A +15 VDC / 0.3 A +12 VDC / 0.4 A +15 VDC / 0.3 A -12 VDC / 0.4 A -15 VDC / 0.3 A -12 VDC / 0.4 A -15 VDC / 0.3 A 18 - 36 VDC *5 VDC / 8.0 A -12 VDC / 1.8 A -15 VDC / 1.4 A +12 VDC / 0.4 A +15 VDC / 0.3 A +12 VDC / 0.4 A +15 VDC / 0.3 A -12 VDC / 0.4 A -15 VDC / 0.3 A -12 VDC / 0.4 A -15 VDC / 0.3 A 36 - 75 VDC *5 VDC / 8.0 A -12 VDC / 1.8 A -15 VDC / 1.4 A +12 VDC / 0.4 A +15 VDC / 0.3 A +12 VDC / 0.4 A +15 VDC / 0.3 A -12 VDC / 0.4 A -15 VDC / 0.3 A -12 VDC / 0.4 A -15 VDC / 0.3 A http://www.tracopower.com * dynamic current allocation, max. 8A total output current for both outputs together DC/DC Converters TEN 40 Input Specifications Input current at no load 12 V models: 200 mA typ. 24 V models: 100 mA typ. 48 V models: 50 mA typ. 3.3 V single 5.0 / 12 V single 3.3 & 5 V dual 12 / 15 V dual 3.3 V triple 5.0 V triple output output output output output output models: models: models: models: models: models: 2680 / 1325 / 655 mA typ. 4065 / 2000 / 1000 mA typ. 3415 / 1685 / 825 mA typ. 4400 / 2100 / 1050 mA typ. 3000 / 1500 / 750 mA typ. 4000 / 1990 / 980 mA typ. 5 V/ms, max. (complies with ETS300 132 part 4.4) 12 Vin models: 9 VDC / 8 VDC (typ.) 24 Vin models: 17.8 VDC / 15.8 VDC (typ.) 48 Vin models: 36 VDC / 33 VDC (typ.) 12 / 24 / 48 Vin models: 25/50/100 V max. EN 55022 level A, FCC part 15, level A with external capacitor (see note 1) EN 61000-4-2, perf. criteria B EN 61000-4-4, perf. criteria B EN 61000-4-5, perf. criteria B 1% ( 5% for auxilary outputs) 10% (only for single output models and symetric dual output models) - Input variation Vin min. to Vin max. single output models: dual output models: triple output models (main/auxiliary): - Load variation 10 - 100 % single output models: dual output models: triple output models: - Load cross variation 25 % /100 % Dual output models: triple output models (main/auxiliary): 0.5% max. 1% max. 1% max. / 5% max. 0.5% max. 1% max. 2% max. / 5% max. 5% max. 1% max. / 5 % max. 0.02%/K max. 3.3 V & 5 V outputs: 50 mVpk-pk max. dual outputs: 150 mVpk-pk max. all other outputs: 75 mVpk-pk max. 25 ms typ. 300 s typ. indefinite (automatic recovery) 150% of Iout max typ. foldback @ 115C typ 3.3 5 12 15 V V V V output: output: output: output: 3.9 V 6.2 V 15 V 18 V 40 Watt Input current at full load (nominal input 12/24/48 Vin) Input voltage variation (dv/dt) Start-up voltage / under voltage lockout Surge voltage (100 msec. max.) Conducted noise (input) ESD (input) Fast transient (input) Surge (input) Output Specifications Voltage set accuracy Output voltage adjustment Regulation Temperature coefficient Ripple and noise (20 MHz Bandwidth) Start up time (nominal Vin and constant resistive load) Transient response time (25% load change) Short circuit protection Over load protection Thermal shutdown Over voltage protection All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 9 DC/DC Converters TEN 40 Output Specifications Minimum load (only for dual output models) 10% of rated max current (operation at lower load condition will not damage these converters, however, they may not meet all listed specifications) 3.3 V / 5 V / 12 V / 15 V: 21'000 / 13'600 / 2'360 / 1510 F max. dual output models (3.3 V / 5 V): 11'000 / 6'800 F max. dual output models ( 12 V / 15V): 1'200 / 750 F max. (on each output) 3.3 V triple output models: 13'000 / 330 F max. (main-/output 2 & 3) 40 Watt Capacitive load output models General Specifications Temperature ranges - Operating - Case temperature - Storage - 40 C ... + 85 C + 100 C max. - 55 C ... + 125 C see graphs on page 3 to 5 95 % rel H max. > 510'000 h @ + 25 C 1`500 VDC 1000 pF max. > 1`000 M Ohm 3.5 ... 12 VDC or open circuit. 0 ... 1.2 VDC or short circuit pin 3 and pin 2 2.5 mA max. 300 kHz typ. (Pulse width modulation PWM) 10-55Hz, 2G, 30 minutes along X,Y,Z UL 1950, EN 60950, IEC 60950 compliance up to 60 VDC input voltage (SELV limit) UL /cUL File E 188913 - Voltage - Capacity - Resistance - On: - Off: - Off idle current: Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation (Input/Output) Remote On/Off Switching frequency (fixed) Vibration Safety standards Safety approvals Note 1: In order to meet conducted emissions EN55022-A and EN55011-A a capacitor between +Vin and -Vin has to be installed. The capacitor should be capable to handle 1 A ripple current. A suggestion is KMF Series of Nippon chemi-con, 220F/100V, ESR 90mOhm. Output Voltage Adjustment Trim up Trim Trim down Ru +Vout Rd Trim Ru [kohm]* - Vout Ru [kohm]* output +5% +10% 3.3V 6.8 1.5 5V 4.7 0.56 12V 47 8.2 12V 15V 47 33 2.2 2.7 output -5% -10% 3.3V 8.2 0.68 5V 5.6 0.68 12V 56 5.6 12V 15V 33 39 2.7 3.3 *approximate values All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 9 DC/DC Converters TEN 40 Power De-rating Natural convection without heat-sink Natural convection with heat-sink TEN-HS3 500 LFM with heat-sink TEN-HS3 TEN 40-1210 100 100 40 Watt TEN 40-1211 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-1212 100 100 TEN 40-1220 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-1222 100 100 TEN 40-1223 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] http://www.tracopower.com Page 4 of 9 DC/DC Converters TEN 40 Power De-rating TEN 40-1231 100 100 40 Watt TEN 40-1232 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-1233 100 100 TEN 40-1234 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-2410 100 100 TEN 40-2411 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] http://www.tracopower.com Page 5 of 9 DC/DC Converters TEN 40 Power De-rating TEN 40-2412 100 100 40 Watt TEN 40-2420 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-2422 100 100 TEN 40-2423 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-2431 100 100 TEN 40-2432 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] http://www.tracopower.com Page 6 of 9 DC/DC Converters TEN 40 Power De-rating TEN 40-2433 100 100 40 Watt TEN 40-2434 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-4810 100 100 TEN 40-4811 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-4812 100 100 TEN 40-4820 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] http://www.tracopower.com Page 7 of 9 DC/DC Converters TEN 40 Power De-rating TEN 40-4822 100 100 40 Watt TEN 40-4823 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-4831 100 100 TEN 40-4832 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 40-4833 100 100 TEN 40-4834 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] http://www.tracopower.com Page 8 of 9 DC/DC Converters TEN 40 Physical Specifications Case material Baseplate material Potting material Weight Soldering temperature copper, nickel plated none conductive FR4 epoxy (UL 94V-0 -rated) 65 g (2.3 oz) max. 265 C / 10 sec. 40 Watt Outline Dimensions Pin-Out Pin 1 2 3 4 45.7 (1.8) (0.3) (0.3) (0.2) (0.3) (0.2) (0.3) 7.62 7.62 5.08 7.62 5.08 7.62 50.8 (2.0) 7 6 5 Bottom view 5.08 10.16 9 8 12.7 (0.5) 3 2 1 Single +Vin (Vcc) -Vin (GND) No con. -Sense +Sense +Vout -Vout Trim (0.2) (0.4) Dual symmetric +Vin (Vcc) -Vin (GND) No pin +Vout Common Common -Vout Trim Dual assymmetric +Vin (Vcc) -Vin (GND) + Vout 1 -Vout No con. No con. +Vout 2 -Vout2 Triple +Vin (Vcc) -Vin (GND) + Vout 2 Common 2/3 -Vout 3 +Vout 1 -Vout 1 No con. 4 Remote On/Off (0.14) 3.5 5 6 7 8 9 10.2 (0.4) 50.8 (2.0) Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.02 0.002) Pin pitch tolerances: 0.35 (0.014) Case tolerances: 0.5 (0.02) Heat-sink TEN-HS3 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter Order code: TEN-HS3 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 22g (0.78oz) (without converter) 17.0 (0.67) max. Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heatsinks already mounted. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Specifications can be changed without notice Rev. 09/05 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43311 4511 * Fax +41 43311 4545 * info@traco.ch * www.tracopower.com 14.5 (0.57) Page 7 of 9 |
Price & Availability of TEN40-4834 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |